User manual

APS User Manual
326
1.4.5 Diagnostics
This section provides a set of basic system diagnosis. It lets users know whether the system is healthy
or needs to be fixed. Users can also check network connectivity issues with the Ping command. The
basic system check includes ICMP Ping, ICMPv6, and VeriPHY Cable Diagnostics.
1.4.5-1 Ping
This section is used to test network connectivity issues using the Ping command.
Web Interface
To test network connectivity using the switch via the Web Interface:
1. Click Maintenance, Diagnostics and Ping.
2. Enter the IP Address of the device you are trying to communicate with.
3. Set the ping Data Length, Ping Count and Ping Interval.
4. Click the Start button to commence the test.
Fig. 157 Ping Command