User manual

APS User Manual
321
1.4.3-2 Save Start
This section describes how to save the Switch Start configuration. Any current configuration files will
be saved as XML format. This must be performed after configuration of the switch. If the Start
configuration is not saved after the switch has been powered off it will revert back to previous
settings.
Web Interface
To Save the Startup Configuration in the switch via the Web Interface:
1. Click Maintenance, Save/Restore and Save Start.
2. Press Save.
Parameter Description
Save: Save Start Up Configuration.
NOTE:
This must be performed after configuration of the switch. If the
Start configuration is not saved after the switch has been
powered off it will revert back to previous settings.
Fig. 152 Save Start Up Configuration