User manual

APS User Manual
320
1.4.3 Save/Restore
This section is used to backup, restore, and save the configuration in the switch.
1.4.3-1 Factory Defaults
This section is used to reset the switch back to its factory default settings.
Web Interface
To Factory Default the switch via the Web Interface:
1. Click Maintenance, Save/Restore and Factory Defaults.
2. Select to set the IP Address back to Factory Default, or leave it as previously configured.
3. Press Yes to set the switch to Factory Default Settings, press No to cancel the request.
Parameter Description
Restore Default Configuration without changing current IP Address: Check this box if you do not want
to reset the IP Address to factory default.
Yes: Press Yes button to factory default the switch.
No: Press No to cancel the request.
Fig. 151 Factory Defaults