User manual

APS User Manual
318
1.4.2-2 Firmware Selection
This section is used to switch between the latest uploaded firmware image and the previously
uploaded firmware image. This page displays both firmware file details including the version
number.
Web Interface
To select the required firmware to be used in the switch via the Web Interface:
1. Click Maintenance, Firmware and Firmware Selection.
2. Click on the Activate Alternate Image button to switch to the old firmware version.
Parameter Description
Image: The flash index name of the firmware image. The name of primary
(preferred) image is managed, the alternate image is named managed.bk.
Version: The version of the firmware image.
Date: The date of the firmware image.
Activate Alternate Image: Click this button to switch to the Alternate firmware version.
Cancel: Cancel the firmware selection process.
Fig. 150 Firmware Selection