User manual

APS User Manual
313
1.3.11 Auth Method
The APS Series switches support different ways of authenticating a user when logging into the
management of the switch. Authentication can be done locally, via TACACS+ or via RADIUS.
Web Interface
To configure the Authentication Method via the web interface:
1. Click Security and Auth Method.
2. Select the Authentication method for console, telent, ssh and web access.
3. Select to enable Fallback.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Client: The management client for which the configuration below applies.
Authentication Method: Authentication Method can be set to one of the following values:
None: authentication is disabled and login is not possible.
Local: use the local user database on the switch for authentication.
Radius: use a remote RADIUS server for authentication.
Tacacs+: use a remote TACACS+ server for authentication.
Fig. 147 Authentication Method Configuration