User manual

APS User Manual
307
Delete: Check to delete the entry. It will be deleted during the next save.
Start IP Address: Indicates the start IP address for the access management entry.
End IP Address: Indicates the end IP address for the access management entry.
HTTP/HTTPS: Indicates that the host can access the switch from HTTP/HTTPS interface if
the host IP address matches the IP address range provided in the entry.
SNMP: Indicates that the host can access the switch from SNMP interface if the host
IP address matches the IP address range provided in the entry.
TELNET/SSH: Indicates that the host can access the switch from TELNET/SSH interface if
the host IP address matches the IP address range provided in the entry.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.