User manual

APS User Manual
297
sions
retransmitted to the RADIUS
accounting server.
Tx
Pending
Requests
radiusAccClientExtPendingRe
quests
The number of RADIUS packets
destined for the server that have not
yet timed out or received a response.
This variable is incremented when a
Request is sent and decremented
due to receipt of a Response,
timeout, or retransmission.
Tx
Timeouts
radiusAccClientExtTimeouts
The number of accounting timeouts
to the server. After a timeout, the
client may retry to the same server,
send to a different server, or give up.
A retry to the same server is counted
as a retransmit as well as a timeout.
A send to a different server is
counted as a Request as well as a
timeout.
Other Info: This section contains information about the state of the server and the
latest round-trip time.
Name
RFC4670 Name
Description
IP Address
-
IP address and UDP port for the accounting server in
question.
State
-
Shows the state of the server. It takes one of the
following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP
communication is not yet up and running.
Ready: The server is enabled, IP communication is
up and running, and the RADIUS module is ready to
accept accounting attempts.
Dead (X seconds left): Accounting attempts were
made to this server, but it did not reply within the
configured timeout. The server has temporarily
been disabled, but will get re-enabled when the