User manual

APS User Manual
290
IP Address/Hostname: The IP address or hostname of the RADIUS Accounting Server. IP address is
expressed in dotted decimal notation.
Port: The UDP port to use on the RADIUS Accounting Server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS Accounting Server.
Secret: The secret - up to 29 characters long - shared between the RADIUS
Accounting Server and the switch.
TACACS+ Authentication Server Configuration
#: The TACACS+ Authentication Server number for which the configuration
below applies.
Enabled: Enable the TACACS+ Authentication Server by checking this box.
IP Address/Hostname: The IP address or hostname of the TACACS+ Authentication Server. IP
address is expressed in dotted decimal notation.
Port: The TCP port to use on the TACACS+ Authentication Server. If the port is set
to 0 (zero), the default port (49) is used on the TACACS+ Authentication
Server.
Secret: The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.