User manual

APS User Manual
287
1.3.6 AAA
The APS Series switches supports AAA (Authentication, Authorization, Accounting) to provide access
control to your network. The AAA server can be a TACACS+ or RADIUS server to create and manage
objects that contain settings for using AAA servers.
1.3.6-1 Configuration
This section is used to configure the AAA settings for the APS switch.
Web Interface
To configure a Common Configuration of AAA in the web interface:
1. Click Security, AAA and Configuration.
2. Set Timeout (Default is 15 seconds).
3. Set Dead Time (Default is 300 seconds).
To configure a TACACS+ Authorization and Accounting Configuration of AAA in the web interface:
1. Click Security, AAA and Configuration.
2. Select “Enabled” in the Authorization.
3. Select “Enabled” in the Failback to Local Authorization.
4. Select “Enabled” in the Account.
To configure a RADIUS Authentication Server Configuration of AAA in the web interface:
1. Check “Enabled”.
2. Specify IP address or Hostname for Radius Server.
3. Specify Authentication Port for Radius Server (Default is 1812).
4. Specify the Secret with Radius Server.
To configure a RADIUS Accounting Server Configuration of AAA in the web interface:
1. Check “Enabled”.
2. Specify IP address or Hostname for Radius Server.
3. Specify Authentication Port for Radius Server (Default is 1813).
4. Specify the Secret with Radius Server.
To configure a TACACS+ Authentication Server Configuration of AAA in the web interface: