User manual

APS User Manual
273
1.3.5 NAS
The APS Series switches supports a NAS (Network Access Server) function which allows users
connection to a variety of resources, including the internet. Particular settings can be applied to this
user based on authentication to a RADIUS Server. Functions such as 802.1x and Mac based
Authentication can be used to authenticate users onto the network allowing them access to these
shared resources.
1.3.5-1 Configuration
This section is used to configure the NAS settings for the APS switch.
Web Interface
To configure the NAS settings of the switch via the Web Interface:
1. Click Security, NAS and Configuration.
2. Enable and configure the system wide parameters for the NAS server.
3. Configure the required settings for each of the ports that will utilize the NAS function.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 134 Network Access Server Configuration