User manual

APS User Manual
269
1.3.4 DHCP Replay
The APS Series switches supports the DHCP Relay function. DHCP Relays are used to forward DHCP
requests to other DHCP Server on the same or on another subnet. This section is used to configure
the DHCP Relay parameters.
1.3.4-1 Configuration
This section is used to configure the DHCP Relay settings for the APS switch.
Web Interface
To configure the DHCP Relay settings of the switch via the Web Interface:
1. Click Security, DHCP Relay and Configuration.
2. Select to enable or disable the DHCP Relay function.
3. Enter the IP Address of the Relay Server IP Address.
4. Select to enable or disable the Relay Information Mode setting.
5. Select the appropriate Relay Information Policy.
6. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 132 DHCP Relay Configuration