User manual

APS User Manual
265
1.3.3 DHCP Snooping
The APS Series switches supports DHCP Snooping. The section describes how to configure the DHCP
Snooping parameters of the switch. DHCP Snooping can prevent attackers from adding their own
DHCP servers on the network.
1.3.3-1 Configuration
This section is used to configure the DHCP Snooping settings for the APS switch.
Web Interface
To configure the DHCP Snooping settings of the switch via the Web Interface:
1. Click Security, DHCP Snooping and Configuration.
2. Select to enable or disable DHCP Snooping on the switch.
3. Select either trusted or untrusted for each port.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Snooping Mode: Indicates the DHCP snooping mode operation. Possible modes are:
Enabled: Enable DHCP snooping mode operation. When DHCP snooping
mode operation is enabled, the DHCP request messages will be forwarded
Fig. 130 DHCP Snooping Configuration