User manual

APS User Manual
263
1.3.2-3 Dynamic Table
This section is used to view the dynamic ARP Inspection entries.
Web Interface
To view the Dynamic ARP entries via the Web Interface:
1. Click Security, ARP Inspection and Dynamic Table.
2. To filter the entries you can select the Start from Port, VLAN ID and or IP Address.
3. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
4. Click Refresh to manually refresh the information.
Parameter Description
Port: Physical port of the switch.
VLAN ID: VLAN ID of the IP traffic that’s permitted.
IP Address: IP Address of the dynamic entry.
Mac Address: MAC Address of the dynamic entry.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.
Refresh: Used to manually refresh the information on the page.
Fig. 129 Dynamic Table