User manual

APS User Manual
261
1.3.2-2 Static Table
This section is used to enter Static ARP entries into the APS switch.
Web Interface
To enter Static ARP entries into the Static Table via the Web Interface:
1. Click Security, ARP Inspection and Static Table.
2. Click on Add New Entry.
3. Specify the Port, VLAN ID, IP Address and MAC Address.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Delete: Check the tick box next to the required entry and press the Apply button.
Port: Physical port of the switch.
VLAN ID: The VLAN ID of the static entry.
IP Address: The IP Address of the static entry.
MAC Address: The MAC Address of the static entry.
Fig. 128 Static Table Configuration