User manual

APS User Manual
259
1.3.2 ARP Inspection
The APS Series switches supports ARP Inspection. This allows the switch to intercept and examine all
ARP request and response packets in a subnet and discard those packets with invalid IP to MAC
address bindings.
1.3.2-1 Configuration
This section is used to configure the ARP Inspection settings for the APS switch.
Web Interface
To configure the ARP Inspection settings of the switch via the Web Interface:
1. Click Security, ARP Inspection and Configuration.
2. Select to enable or disable the ARP Inspection feature.
3. Select to enable or disable this function on each individual port.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Mode: Enable or Disable the Global ARP Inspection.
Port: Physical port of the switch.
Fig. 127 ARP Inspection Configuration