User manual

APS User Manual

Parameter Description

DHCP Client: Enable the DHCP Client by checking the tick box. When selected, the switch

will obtain an IP Address from your DHCP Server. If the switch does not

receive an IP Address the Default IP Address will be used.

Renew: Click the Renew button to renew the DHCP lease from the DHCP Server.

IP Address: Enter the required static IP Address in dotted decimal notation.

IP Mask: Enter the required Subnet Mask in dotted decimal notation.

IP Router: Enter the required Default Gateway in dotted decimal notation.

VLAN ID: Provide the VLAN ID of the management interface. Valid range is from 1 to

4095.

DNS Proxy: When DNS proxy is enabled, the switch will relay DNS requests to the

currently configured DNS server, and reply as a DNS resolver to the client

devices on the network.

Fig. 10 IPv4 Address Configuration