User manual

APS User Manual
255
1.3.1-2 Static Table
This section is used to enter Static IP addresses into the APS switch.
Web Interface
To enter Static IP Addresses into the Static Table via the Web Interface:
1. Click Security, IP Source Guard and Static Table.
2. Click on Add New Entry.
3. Specify the Port, VLAN ID, IP Address and MAC Address.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Delete: Check the tick box next to the required entry and press the Apply button.
Port: Physical port of the switch.
VLAN ID: The VLAN ID of the static entry.
IP Address: The IP Address of the static entry.
MAC Address: The MAC Address of the static entry.
Fig. 125 Static Table Configuration