User manual

APS User Manual
254
Parameter Description
Mode: Enable the Global IP Source Guard or disable the Global IP Source Guard. All
configured ACEs will be lost when the mode is enabled.
Port: Physical port of the switch.
Mode: Select to enable or disable the IP Source Guard function on the select port.
The global IP Source Guard Mode must also be enabled, when enabling each
individual port.
Max. Dynamic Clients: Specify the maximum number of dynamic clients that can be learnt on any
given port. This value can be 0, 1, 2 or unlimited. If the port mode is enabled
and the value of max dynamic client is equal to 0, only IP Packets that have
been entered into the static table will be forwarded.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.