User manual

APS User Manual
253
1.3 Security
This chapter describes the Security configuration options available in the APS Series of switches.
Features such as IP Source Guard, Port Security, HTTPS, DHCP Snooping, DHCP Relay and many more
can be configured from this section.
1.3.1 IP Source Guard
The APS Series switches support IP Source Guard. IP Source Guard can be used to help secure your
switch from IP based spoofing attacks.
1.3.1-1 Configuration
This section is used to configure the IP Source Guard settings for the APS switch.
Web Interface
To configure the IP Source Guard settings of the switch via the Web Interface:
1. Click Security, IP Source Guard and Configuration.
2. Select to enable or disable the IP Source Guard feature.
3. Select to enable or disable this function on each individual port.
4. Select the amount of Dynamic Clients allowed to be learnt by the port.
5. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 124 IP Source Guard Configuration