User manual

APS User Manual
251
1.2.23 UPnP
The APS Series switches support UPnP. UPnP is an acronym for Universal Plug and Play. The goals of
UPnP are to allow devices to connect seamlessly and to simplify the implementation of networks in
the home (data sharing, communications, and entertainment) and in corporate environments for
simplified installation of computer components.
Web Interface
To configure the UPnP settings via the Web Interface:
1. Click Configuration and UPnP.
2. Select to enable or disable UPnP.
3. Configure the required parameters.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Mode: Indicates the UPnP operation mode. Possible modes are:
Enabled: Enable UPnP mode operation.
Disabled: Disable UPnP mode operation.
When the mode is enabled, two ACEs are added automatically to trap UPNP
Fig. 123UPnP Configuration