User manual

APS User Manual
247
1.2.21 Trap Event Severity
The APS Series switches support trap events that can alert the administrator if a particular event
occurs. This section is used to customize the severity levels of the trap events. Administrators can
manually configure each event to have a Severity level of Emerg, Alert, Crit, Error, Warning, Notice,
Info and Debug.
Web Interface
To configure the Trap Event Severity levels via the Web Interface:
1. Click Configuration and Trap Event Severity.
2. Change the Severity Level of each of the Trap Events.
3. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Group Name: The name identifying the severity group.
Severity Level: Scroll to select a severity level for each group. The following level types are
supported:
<0> Emergency: System is unusable.
<1> Alert: Action must be taken immediately.
<2> Critical: Critical conditions.
Fig. 121 Trap Event Severity levels