User manual

APS User Manual
246
Parameter Description
Port to Mirror on: Port to mirror also known as the mirror port. Frames from ports that have
either source (rx) or destination (tx) mirroring enabled are mirrored on this
port. Disabled disables mirroring.
Port: Physical port of the switch.
Mode: Used to select the Mirror Mode.
Rx only: Frames received on this port are mirrored on the mirror port.
Frames transmitted are not mirrored.
Tx only: Frames transmitted on this port are mirrored on the mirror port.
Frames received are not mirrored.
Disabled: Neither frames transmitted nor frames received are mirrored.
Enabled: Frames received and frames transmitted are mirrored on the
mirror port.
NOTE: For a given port, a frame is only transmitted once. It is
therefore not possible to mirror Tx frames on the mirror port.
Because of this, mode for the selected mirror port is limited to
Disabled or Rx only.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.