User manual

APS User Manual
245
1.2.20 Mirroring
The APS Series switches support traffic mirroring to capture and analyze real time traffic.
You can mirror traffic from any source port to a target port for real-time analysis. You can then
attach a logic analyzer or RMON probe to the target port and study the traffic crossing the source
port in a completely unobtrusive manner.
Mirror Configuration is to monitor the traffic of the network. For example, we assume that Port A
and Port B are Monitoring Port and Monitored Port respectively, thus, the traffic received by Port B
will be copied to Port A for monitoring.
Web Interface
To configure the Port Mirroring settings via the Web Interface:
1. Click Configuration and Mirroring.
2. Select the port that you wish to mirror on. This port will be used to collect the data.
3. Select the ports and mode that you wish to monitor. All traffic from this port will be sent to
the port selected above.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 120 Port Mirroring