User manual

APS User Manual
244
Security-enabled port. Since all ports draw from the same pool, it may
happen that a configured maximum cannot be granted, if the remaining
ports have already used all available MAC addresses.
Spanning Tree Admin Edge: Controls whether the operEdge flag should start as set or cleared. (The
initial operEdge state when a port is initialized).
Spanning Tree BPDU Guard: If enabled, causes the port to disable itself upon receiving valid BPDU's.
Contrary to the similar bridge setting, the port Edge status does not effect
this setting. A port entering error-disabled state due to this setting is subject
to the bridge Port Error Recovery setting as well.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.