User manual

APS User Manual
240
1.2.18-2 Information
This section displays the slave devices and allows the administrator access to these switches.
Web Interface
To view and configure the slave switches of the Single IP Management group via the Web Interface:
1. Click Configuration, Single IP and Information.
2. Click on the index number of the relevant switch you would like to connect to.
3. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
4. Click Refresh to manually refresh the information.
Parameter Description
Index: The ID of the active Slave Switch. The parameter lets you know how many
slave devices are connected to the SIP group.
Model Name: Displays the model name of the slave switch.
MAC Address: Displays the MAC Address of the slave switch.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.
Refresh: Used to manually refresh the information on the page.
Fig. 118 Single IP Information