User manual

APS User Manual
237
1.2.17-2 Status
This section displays the Loop Protection status of individual ports.
Web Interface
To view the Loop Protection status via the Web Interface:
1. Click Configuration, Loop Protection and Status.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
Port: Physical port of the switch.
Action: The currently configured port action.
Transmit: The currently configured port transmit mode.
Loops: The number of loops detected on this port.
Status: The current loop protection status of the port.
Time of Last Loop: The time of the last loop event detected.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.
Refresh: Used to manually refresh the information on the page.
Fig. 116 Loop Protection Status