User manual

APS User Manual
236
Transmission Time: The interval between each loop protection PDU sent on each port. Valid
values are 1 to 10 seconds.
Shutdown Time: The period (in seconds) for which a port will be kept disabled in the event of
a loop is detection (and the port action is to shut down the port). Valid
values are 0 to 604800 seconds (7 days). A value of zero will keep a port
disabled (until next device restart).
Port: Physical port of the switch.
Enable: Used to enable or disable Loop Protection on each individual port.
Action: Configures the action performed when a loop is detected on a port. Valid
values are Shutdown Port, Shutdown Port and Log or Log Only.
Tx Mode: Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.