User manual

APS User Manual
22
Parameter Description
User Name: The name identifying the user, enter the username that you want to create.
Password: Enter the required password. The password length can be between 0 and
255 characters.
Password (again): Re-enter the password from the password field.
Privilege Level: Used to assign the privilege level of the user being created. The allowed
privilege range is from 1 through to 15. Level 15 is the highest level and will
give you read/write access to the entire system. Each group can have a
privilege level assigned. For a user to have access to that the group their
privilege level must be equal or greater than the group value. By default
every group is set to level 10 except the maintenance group which is set to
15. When creating users, guest users would be set to privilege level 5,
standard users to 10 and administrators to 15. Guests will then have read
only access to the system, standard users can do everything except
maintenance tasks and the administrator will have full control of the switch.
Fig. 8 Adding a New User