User manual

APS User Manual
226
DSCP – Diffserv Code Point value. (Options: Any, specific value of 0-63, BE,
CS1-CS7, EF or AF11-AF43, or Range; Default: Any)
IPv6 – IPv6 frame type includes the same settings as those used for IPv4,
except for the Source IP. When configuring a specific IPv6source address,
enter the least significant 32 bits (a.b.c.d) using the same type of mask as
that used for an IPv4 address.
Sport – Source TCP/UDP port. (Any, Specific/Range: 0-65535)
Dport – Destination TCP/UDP port. (Any, Specific/Range: 0-65535)
Class (Classified QoS Class): If a frame matches the QCE, it will be put in the queue corresponding to
the specified QoS class, or placed in a queue based on basic classification
rules.
Options: 0-7, Default (use basic classification)
Default setting: 0
DPL: The drop precedence level will be set to the specified value or left
unchanged.
Options: 0-1, Default
Default setting: Default
DSCP: The DSCP value will be set to the specified value or left unchanged.
Options: 0-63, BE, CS1-CS7, Default (not changed)
Default setting: Default)
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.