User manual

APS User Manual
223
Parameter Description
QCE: Quality Control Entry Index.
Port: Physical port of the switch.
Frame Type: Indicates the type of frame to look for in incoming frames. Possible frame
types are: Any, Ethernet, LLC, SNAP, IPv4, and IPv6.
SMAC: The OUI field of the source MAC address, i.e. the first three octets (bytes) of
the MAC address.
DMAC: The type of destination MAC address. Possible values are: Any, Broadcast,
Multicast, and Unicast.
VID: VLAN ID. Valid Range 1 – 4095
PCP: PCP is an acronym for Priority Code Point. It is a 3-bit field storing the
priority level for the 802.1Q frame.
DEI: DEI is an acronym for Drop Eligible Indicator. It is a 1-bit field in the VLAN
tag.
Action: Indicates the classification action taken on ingress frames, if the configured
parameters are matched in the frame's content. If a frame matches the QCE,
the following actions will be taken:
Class (Classified QoS Class) – If a frame matches the QCE, it will be put in the
Fig. 108 Adding a QoS Control List Entry