User manual

APS User Manual
221
1.2.15-9 DSCP Classification
This section is used to map DSCP values to a QoS class and drop precedence level.
Web Interface
To configure the DSCP Classification settings via the Web Interface:
1. Click Configuration, QoS and DSCP Classification.
2. Map the DSCP values to a corresponding QoS class and drop precedence level.
3. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
QoS Class/DPL: Shows the mapping options for QoS class values and DP (drop precedence)
levels.
DSCP: DSCP value. Range is 0 – 63.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Fig. 106 DSCP Classification