User manual

APS User Manual
216
enabled as specified in DSCP Translation window for the specific DSCP.
All: Classify all DSCP values.
Egress Rewrite: DSCP Values can be rewritten based on the below parameters:
Disable: No Egress rewrite.
Enable: Rewrite enable without remapping the DSCP value.
Remap DP Unaware: Frame with DSCP from analyser is remapped and
remarked with the remapped DSCP value. The mapped DSCP value is always
taken from the DSCP Translation table.
Remap DP Aware: Frame with DSCP from analyser is remapped and
remarked with the remapped DSCP value. Depending on the frame's DP
level, the remapped DSCP value is either taken from the DSCP Translation
table or the Egress Remap DP0 or DP1 field.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.