User manual

APS User Manual
214
Parameter Description
Port: Physical port of the switch.
Mode: Shows the tag remarking mode for this port.
Classified: Use classified PCP/DEI values.
Default: Use default PCP/DEI values.
Mapped: Use mapped versions of QoS class and DP level.
Tag Remarking Mode (Classified): When set to Classified no configuration is necessary.
Tag Remarking Mode (Default): When set to Default the Administrator can manually set the PCP and
DEI Values.
Tag Remarking Mode (Mapped): When set to Mapped the Administrator can map the PCP and DEI
values based on the values of the QoS Class and DP Level.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Fig. 102 Port Tag Remarking – Mapped Mode