User manual
APS User Manual
20
1.1.2-2 NTP
NTP (Network Time Protocol) is a protocol used to sync devices on the network with a time server.
Web Interface
To configure the NTP Settings via the Web Interface:
1. Click System, Time and NTP.
2. Enter the required Server addresses in to the fields provided. Up to 5 NTP servers can be
configured.
3. Click Save to apply your changes.
Parameter Description
Server 1 to 5: Enter a valid NTP Server IPv4 or IPv6 address, or enter the FQDN of a valid
NTP Server.
Fig. 6 NTP Time Settings