User manual

APS User Manual
208
1.2.15-4 Port Shaping
This section provides an overview of QoS Egress Port shaping for all switch ports.
Web Interface
To configure the QoS Port Shaping settings via the Web Interface:
1. Click Configuration, QoS and Port Shaping.
2. Click on the required port to configure the shaping options.
3. You will now be prompted with another screen, here you can select to use Strict Priority or
Weighted.
4. Configure your Egress bandwidth parameters based on Queue Settings or force the port to a
desired speed. If using Weighted a total percentage of a queue can also be set.
5. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 96 Port Shaping