User manual

APS User Manual
206
Parameter Description
QoS Egress Port Schedulers
Port: Physical port of the switch.
Mode: Displays the configured Mode type, Strict Priority or Weighted.
Weight (Q0-5): Shows the current weight for this queue and corresponding port.
QoS Egress Port Scheduler and Shapers (Strict Priority)
Scheduler Mode: Select the required Scheduler Mode for the port, Strict Priority or Weighted.
Queue Shaper Enable: Tick the box next to the appropriate queue to enable the Queue Shaper.
Queue Shaper Rate: Enter the required bandwidth rate, maximum values are based on the speed
on the port. If running at 1Gb, 1000000 Kbps or 1000Mbps.
Default value is 500.
Queue Shaper Unit: Select whether the shaping rate is measured in kbps or Mbps.
Default is kbps.
Queue Shaper Excess: Enable this if the queue is allowed to use excess bandwidth available on the
switch.
Port Shaper Enable: Tick the box to enable Port shaping on the selected port.
Fig. 95 Port Scheduling – Weighted