User manual

APS User Manual
18
1.1.2 Time
The page is used to configure the time setting on the switch. Time can be set manually or via a NTP
server. By default NTP is used and is set to au.pool.ntp.org.
1.1.2-1 Manual
The time for the switch can set manually or via a NTP Server. When setting manually simply enter
the date and time into the paces provided.
Web Interface
To configure the time settings via the Web Interface:
1. Click System, Time and Manual.
2. Select use Local Settings.
3. Enter the time and date into the Local Time field.
4. Enter the Time Zone Offset.
5. If you would like to enable Daylight Savings, un-tick the box and enter the required Time
Offset and the dates for when Daylights Savings begins and ends.
6. Click Save to apply your changes.
Fig. 5 Manual Time Settings