User manual

APS User Manual
188
VLAN ID: Indicates the ID to which the Group Name will be mapped. A valid VLAN ID
ranges from 1-4095.
Port Members: A row of check boxes for each port is displayed for each Group Name to
VLAN ID mapping. To include a port in a mapping, check the box. To remove
or exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members, and all boxes are unchecked.
Add New Entry: Click to add a new entry to the mapping table. An empty row is added to the
table, the Group Name, VLAN ID and port members can be configured as
needed.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Refresh: Used to manually refresh the information on the page.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.