User manual

APS User Manual
185
Parameter Description
Delete: To delete a Protocol-based VLAN entry, check this box and press Apply. The
entry will be deleted on the selected switch.
Frame Type: Select the frame type for the group, valid values are Ethernet, LLC and SNAP.
NOTE: Once you change the Frame type field, the valid value of the
following text field will vary depending on the new frame type you
have selected.
Value: Valid values that can be entered in this text field depends on the option
selected from the preceding Frame Type selection menu.
Below is the criteria for three different Frame Types:
Ethernet: Values in the text field when Ethernet is selected as a Frame Type
is called etype. Valid values for etype ranges from 0x0600-0xffff
LLC: Valid value in this case is comprised of two different sub-values.
a. DSAP: 1-byte long string (0x00-0xff)
b. SSAP: 1-byte long string (0x00-0xff)
SNAP: Valid value in this case also is comprised of two different sub-values.
Fig. 83 Protocol-based VLAN’s