User manual

APS User Manual
182
Parameter Description
Delete: To delete a MAC-based VLAN entry, check this box and press Apply. The
entry will be deleted on the selected switch.
MAC Address: Indicates the MAC Address.
VLAN ID: Indicates the VLAN ID.
Port Members: A row of check boxes for each port is displayed for each MAC-based VLAN
entry. To include a port in a MAC-based VLAN, check the box. To remove or
exclude the port from the MAC-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Add New Entry: Click to add a new MAC-based VLAN entry. An empty row is added to the
table, and the MAC-based VLAN entry can be configured as needed. Any
unicast MAC address can be configured for the MAC-based VLAN entry. No
broadcast or multicast MAC addresses are allowed. Legal values for a VLAN
ID are 1 through 4095.
The MAC-based VLAN entry is enabled on the selected switch unit when you
click on "Apply". A MAC-based VLAN without any port members on any unit
will be deleted when you click "Apply".
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Fig. 81 MAC-based VLAN Configuration