User manual

APS User Manual
176
1.2.11-4 Port Status
This section is used to view the port specific values relating to the VLAN information.
Web Interface
To view the current Port Information via the Web Interface:
1. Click Configuration, VLAN and Port Status.
2. If you want to view specific Port information based on a particular protocol used, select the
protocol from the drop down box near the top of the page. Only Port Information relating to
that protocol will be displayed.
3. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
4. Click Refresh to manually refresh the information.
Parameter Description
Port: Physical port of the switch.
PVID: Shows the VLAN identifier for that port. The allowed values are 1 through
4095.
The default value is 1.
Fig. 78 Port Information