User manual
APS User Manual
174
1.2.11-3 Switch Status
This section is used to view the currently configured VLAN groups. VLAN groups which have been
learnt from other protocols such as GVRP can also be viewed here.
Web Interface
To view the current VLAN groups via the Web Interface:
1. Click Configuration, VLAN and Switch Status.
2. If you want to view specific VLAN groups based on a particular protocol, select the protocol
from the drop down box near the top of the page. Only VLAN groups relating to that
protocol will be displayed.
3. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
4. Click Refresh to manually refresh the information.
Parameter Description
VLAN ID: Indicates the VLAN ID of the particular entry.
Port Members: Displays the port members that belong to a particular VLAN group. If the
check box it ticked it means that port belongs to that VLAN group.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.
Fig. 77 VLAN Status