User manual

APS User Manual
173
not a member of the classified VLAN of the frame, the frame is discarded.
By default, ingress filtering is disabled.
Frame Type: Determines whether the port accepts all frames or only tagged/untagged
frames. This parameter affects VLAN ingress processing. If the port only
accepts tagged frames, untagged frames received on the port are discarded.
By default, the field is set to All.
Egress Rule: This field determines what happens to the frames that leave and are
received by the configured ports. There are three options Hybrid, Access and
Trunk.
Hybrid – The Hybrid port type will allow both untagged and tagged packets
to be sent/received by the port. Use this port type when connecting to
VLAN-unaware or VLAN-aware devices.
Access – The Access port type will only allow untagged packets to be
sent/received from the port. Use this port type when connecting to VLAN-
unaware devices.
Trunk – The Trunk port type will only allow tagged packets to be
sent/received from the port. Use this port type when connecting to VLAN-
aware devices.
PVID: Configure the VLAN identifier for the port. The allowed values are 1 through
4095.
The default value is 1.
NOTE: The port must be a member of the same VLAN as the Port
VLAN ID.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.