User manual

APS User Manual
163
Retry Time: How many times the switch will try and ping the device before the failure is
logged and the Failure Action is implemented.
Default is 3.
Failure Log: Displays the amount of errors and the amount of times the device has
entered the failure state.
Failure Action: Select the appropriate action to be performed once the PD device cannot be
detected. Options are Nothing and Reboot Remote PD.
Reboot Time: The time for the device to reboot before the switch will start checking its
state.
Default is 15 seconds.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.