User manual

APS User Manual
162
1.2.9-4 Auto Checking
The APS Series PoE switches have a feature that allows the administrator to constantly monitor the
PD device connected to the switch. Periodically it will ping the device, if there is no response the
switch can reboot the device.
Web Interface
To configure the PoE Auto Checking function via the Web Interface:
1. Click Configuration, PoE and Auto Checking.
2. Enter the IP Address and time intervals into the sections provided.
3. Configure the appropriate Failure action and the reboot time for the device.
4. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Parameter Description
Port: Physical port of the switch.
Ping IP Address: The IP Address of the PD device connected to this port.
Interval Time: Enter the Interval time in seconds. This is the time between pinging the
connected device. Default is 30 seconds.
Fig. 71 PoE Auto Checking