User manual

APS User Manual
15
Parameter Description
Model Name: The model name of this device.
System Description: A brief description of this device.
Location: A user-defined value describing the location of the switch.
Contact: A user-defined value, normally the system/network administrator details
will be entered here.
Device Name: A user-defined value, give the switch a descriptive name for easy
identification.
System Date: Shows the system time and date of the switch. These details can be
configured in the Time section. Format is YYYY-MM-DD HH:MM:SS.
System Uptime: The time accumulated since the switch was powered on. Format is Day,
Hour, Minute, Second.
BIOS Version: The current BIOS version running in the switch.
Firmware Version: The current firmware version running in the switch.
Hardware-Mechanical: The current hardware and mechanical version numbers. The figure before
the hyphen is the hardware version, the figure after the hyphen is the
mechanical version.
Series Number: The chipset serial number. Please note this is not the serial number of the
actual switch.
Host IP Address: The IP Address of the switch.
Subnet Mask: The subnet mask of the switch.
Default Gateway: The default gateway of the switch.
Host MAC Address: The MAC Address of the management interface of the switch.
Console Baudrate: The currently configured Baudrate of the switch.
RAM Size: The size of the RAM in the switch.
Flash Size: The size of the flash memory in the switch.
Bridge FDB size: Displays the current Bridge FDB size.
Transmit Queue: Displays the switches transmit hardware priority queue information.