User manual

APS User Manual
158
1.2.9-2 Status
This section is used display the PoE status of each of the ports. Information such as the PoE Class and
how much power the device is using can be viewed here.
Web Interface
To view the status of each PoE Port via the Web Interface:
1. Click Configuration, PoE and Status.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
Local Port: Physical port of the switch.
PD Class: Identifies the PD Class of the device connected to the Port. PD Classes
stipulate the amount of power the connected device may draw. PoE PD
Classes can be Class 0, 1, 2, 3 and 4.
Power Requested: Displays the power requested by the device. This power figure is based on
the PD class of the device.
Power Allocated: Displays the amount of power allocated by the switch for that port.
Fig. 69 PoE Port Status