User manual

APS User Manual
157
Parameter Description
Primary Power Supply: This is a read only value and displays the total power available for PoE
power.
Retry Time: The time before the switch will try and negotiate the supply of power to a
connected device.
Port: Physical port of the switch.
PoE Mode: Used to enable or disable PoE on the selected port.
Priority: A priority can be set per port. In case of switch PoE power overload the
ports with the highest priority will continue to function, those with low
priority will be powered off. Valid values are Low, High, Critical.
Default: Low
Maximum Power (W): Each port can have a maximum power value set. Please ensure the total
maximum power is not greater than that of the switches total power
budget.
Reset: Tick the Reset box next to the required port to reset the device connected to
it.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Fig. 68 PoE Configuration