User manual

APS User Manual
152
1.2.8-5 EEE
This page provides an overview of EEE information exchanged by LLDP.
Web Interface
To view the LLDP EEE information that has been discovered from the switch via the Web Interface:
1. Click Configuration, LLDP and EEE.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
Local Port: The port on which the LLDP EEE information frames have been transmitted
or received.
Tx Tw: The link partner’s maximum time that the transmit path can hold off sending
data after reassertion of LPI.
Rx Tw: The link partner’s time that the receiver would like the transmitter to hold
off to allow time for the receiver to wake from sleep.
Fallback Receive Tw: The link partner’s fallback receive Tw.
A receiving link partner may inform the transmitter of an alternate desired
Tw_sys_tx. Since a receiving link partner is likely to have discrete levels for
Fig. 66 LLDP EEE Information