User manual

APS User Manual
14
1.1 System
This chapter describes the basic configuration tasks required to configure the system information on
the APS Series switches. The System Information page is the default page and will be the first page
you see when you log into the switches web interface.
1.1.1 System Information
The System Information page shows you the following: Model Name, System Description, Location,
Contact, Device Name, System Date, System Uptime, BIOS Version, Firmware Version, Hardware-
Mechanical Version, Series Number, Host IP Address, Subnet Mask, Gateway IP Address, Host MAC
Address, Console Baudrate, RAM Size, Flash Size, Bridge FDB Size, Transmit Queue and Maximum
Frame Size. All relevant fields will be explained in more detail in the chapter.
1.1.1-1 Information
The switches system information is provided here.
Web Interface
To view the System Information via the Web Interface:
1. Click System, System Information and Information.
The current configuration will be displayed, this is read only, and nothing can be
configured here.
Fig. 2 System Information